Adjusting the Brightness and Contrast of the Screen

To adjust the brightness and contrast of the screen, press the MENU button while the rear vision camera image is on the display.

Any adjustments made will only affect the rear vision camera screen.

(Contrast): Touch the + (plus) or – (minus) screen buttons to increase or decrease the contrast of the screen. (Brightness): Touch the + (plus) or – (minus) screen buttons to increase or decrease the brightness of the screen.

Symbols (Contrast): Touch the + (plus) or – (minus) screen buttons to increase or decrease the contrast of the screen.

    See also:

    Managing the Vehicle Damage Repair Process
    In the event that the vehicle requires damage repairs, GM recommends that you take an active role in its repair. If you have a pre-determined repair facility of choice, take the vehicle there, or have ...

    Engine Hour Meter Display
    The Driver Information Center (DIC) can also display the number of hours the engine has run. To display the engine hours, turn the ignition off, then press and hold the reset button for at least four ...

    Shutting the Engine Off After a Remote Start
    To manually shut off a remote start: • Aim the RKE transmitter at the vehicle and press until the parking lamps turn off. • Turn on the hazard warning flashers. • Turn the ignition switch on ...