Tire Pressure

If the vehicle has the Tire Pressure Monitor System (TPMS), the pressure for each tire can be viewed in the DIC. The tire pressure will be shown in either kilopascals (kPa) or pounds per square inch (psi). Press the vehicle information button until the DIC displays FRONT TIRES kPa (PSI) LEFT ## RIGHT ##. Press the vehicle information button again until the DIC displays REAR TIRES kPa (PSI) LEFT ## RIGHT ##.

If a low tire pressure condition is detected by the system while driving, a message advising you to add pressure in a specific tire will appear in the display. See Tire Pressure on page 10‑62 and Tire Messages on page 5‑49 for more information.

If the tire pressure display shows dashes instead of a value, there may be a problem with the vehicle.

If this consistently occurs, see your dealer for service.

    See also:

    Vehicle Reminder Messages
    CHECK TRAILER WIRING On vehicles with the Integrated Trailer Brake Control (ITBC) system, this message may display and a chime may sound when one of the following conditions exists: • A trailer wi ...

    Instrument Cluster
    English Shown, Metric Similar ...

    Range Selection Mode
    Range Selection Mode The Range Selection Mode switch, if equipped, is located on the shift lever. To enable the Range Selection feature: 1. Move the column shift lever to the M(Manual) position ...