Dual Tone Multi-Frequency (DTMF) Tones
The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu-driven phone system.
Account numbers can also be stored for use.
Sending a Number or Name Tag During a Call
1. Press
. The system responds “Ready,” followed by a tone.
2. Say “Dial.” 3. Say the number or name tag to send.
See also:
Tire Pressure for High-Speed Operation
WARNING
Driving at high speeds, 160 km/h (100 mph) or higher, puts an additional strain on tires.
Sustained high-speed driving causes excessive heat buildup and can cause sudden tire failure.
You c ...
Windshield and Wiper Blades
Clean the outside of the windshield with glass cleaner.
Clean rubber blades using lint-free cloth or paper towel soaked with windshield washer fluid or a mild detergent. Wash the windshield thoroughl ...
Using the “Digit Dial” Command
The digit dial command allows a phone number to be dialed by entering the digits one at a time.
After each digit is entered, the system repeats back the digit it heard followed by a tone.
If an unwa ...





