Checking Brake Fluid
Check brake fluid by looking at the brake fluid reservoir. See Engine Compartment Overview on page 10‑6.
The fluid level should be above MIN. If it is not, have the brake hydraulic system checked to see if there is a leak.
After work is done on the brake hydraulic system, make sure the level is above the MIN but not over the MAX mark.
See also:
Removing the Flat Tire and Installing the Spare Tire
1. Do a safety check before proceeding. See If a Tire Goes Flat on page 10‑58 for more information.
2. If the vehicle has a wheel cover, loosen the plastic nut caps with the wheel wrench. They ...
Engine Identification
The eighth character in the VIN is the engine code. This code identifies the vehicle's engine, specifications, and replacement parts. See “Engine Specifications” under Capacities and Specification ...
Parking Brake
To set the parking brake, hold the regular brake pedal down, then push the parking brake pedal down.
If the ignition is on, the brake system warning light will come on.
See Brake System Warning Li ...