Noise Control System

The following information relates to compliance with federal noise emission standards for vehicles with a Gross Vehicle Weight Rating (GVWR) of more than 4 536 kg (10,000 lbs). The noise control system warranty is given in your warranty booklet.

These standards apply only to vehicles sold in the United States.

Federal law prohibits the following acts or the causing thereof:

1. The removal or rendering inoperative by any person, other than for purposes of maintenance, repair or replacement, of any device or element of design incorporated into any new vehicle for the purpose of noise control, prior to its sale or delivery to the ultimate purchaser or while it is in use; or 2. The use of the vehicle after such device or element of design has been removed or rendered inoperative by any person.

Among those acts presumed to constitute tampering are the acts listed below.

Insulation:

Removal of the noise shields or any underhood insulation.

Engine:

Removal or rendering engine speed governor, if the vehicle has one, inoperative so as to allow engine speed to exceed manufacturer specifications.

Fan and Drive:

• Removal of fan clutch, if the vehicle has one, or rendering clutch inoperative.
• Removal of the fan shroud, if the vehicle has one.

Air Intake:

• Removal of the air cleaner silencer.
• Modification of the air cleaner.

Exhaust:

• Removal of the muffler and/or resonator.
• Removal of the exhaust pipes and exhaust pipe clamps.

    See also:

    Checking Coolant
    The coolant surge tank is located in the engine compartment on the passenger side of the vehicle. See Engine Compartment Overview on page 10‑6 for more information on location. The vehicle must ...

    TPMS Sensor Matching Process
    Each TPMS sensor has a unique identification code. The identification code needs to be matched to a new tire/wheel position after rotating the tires or replacing one or more of the TPMS sensors. T ...

    Adding or Removing Categories
    1. From the Home Page press the Config screen button or the CONFIG button on the faceplate. 2. Select Radio Settings from the Config Menu list. 3. Select Add/Remove XM Categories. 4. From the Add ...