Safety Belt Care
Keep belts clean and dry.
WARNING
Do not bleach or dye safety belts.
It may severely weaken them.
In a crash, they might not be able to provide adequate protection.
Clean safety belts only with mild soap and lukewarm water.
See also:
Airbag Readiness Light
This light shows if there is an electrical problem. The system check includes
the airbag sensor(s), passenger sensing system, the pretensioners, the airbag modules,
the wiring, and the crash sensi ...
Steps for Determining Correct Load Limit
1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle's placard.
2. Determine the combined weight of the driver and passengers ...
What to Add
Use only new DOT 3 brake fluid from a sealed container. See Recommended Fluids and Lubricants on page 11‑12.
Always clean the brake fluid reservoir cap and the area around the cap before removi ...