Video Screen
The video screen is located in the overhead console. When the video screen is not in use, push it up into its locked position.
To use the video screen:
1. Push the release button located on the overhead console.
2. Move the screen to the desired position.
If a DVD is playing and the screen is raised to its locked position, the screen remains on; this is normal, and the DVD continues to play through the previous audio source.
Press 
on the remote control or eject the disc to turn off the screen.
The infrared receivers for the wireless headphones and the remote control are located at the rear of the overhead console.
Notice: Avoid directly touching the video screen, as damage may occur. See “Cleaning the Video Screens” later in this section for more information.
See also:
Engine Hours
To display the ENGINE HOURS, place the ignition in LOCK/OFF or ACC/ACCESSORY, then press and hold the trip odometer reset stem for four seconds while viewing the ODOMETER. This display shows the total ...
Lamps
Properly working headlamps, taillamps, and brake lamps are important to see and be seen on the road.
• Signs that the headlamps need attention include dimming, failure to light, cracking, or damage ...
Security Light
The security light should come on briefly as the engine is started.
If the system is working normally, the indicator light turns off. If it does not come on, have the vehicle serviced by your deale ...