Wiper Blade Replacement

Windshield wiper blades should be inspected for wear or cracking.

See Maintenance Schedule on page 11‑3 for more information.

Replacement blades come in different types and are removed in different ways. To replace the wiper blade assembly:

1. Pull the windshield wiper arm away from the windshield.

2. Press the button in the middle of the wiper arm connector and pull the wiper blade away from the arm connector.

2. Press the button in the middle of the wiper arm connector and pull the wiper blade away from the arm connector.

3. Install the new wiper blade and make sure the wiper blade locks into place.

For the proper size and type, see Maintenance Replacement Parts on page 11‑13.

Backglass Wiper Blade

To replace the backglass wiper blade:

1. Pull the wiper blade assembly away from the backglass.

The backglass wiper blade will not lock in a vertical position so care should be used when pulling it away from the vehicle.

2. Rotate the wiper blade assembly, hold the wiper arm in position, and push the blade away from the wiper arm.

3. Replace the wiper blade.

4. Return the wiper arm and blade assembly to the rest position on the glass.

    See also:

    Cargo Management System
    This vehicle has a cargo management system located in the rear. To remove the cargo management cover: 1. Open the cover. It remains open when lifted. 2. Pull the cover up making sure to unhook th ...

    Safety
    GM has improved the Canyon's safety credentials with standard side curtain airbags. Stability and traction control are also standard. GM's electronic stability system uses electronic brake control ...

    Cargo Cover
    For vehicles with a cargo cover, use it to cover items in the rear of the vehicle. To remove the cover from the vehicle, pull both ends toward each other. To reinstall, place each end of the cover ...