Lap Belt (Crew and Extended Cab)
This section is only for the lap belt.
To learn how to wear a lap-shoulder belt, see Lap-Shoulder Belt on page 3‑15.
Your vehicle may have a center seating position. When you sit in the center front seating position, you have a lap safety belt, which has no retractor.
To make the belt longer, tilt the latch plate and pull it along the belt.
Buckle, position, and release it the same way as the lap part of a lap-shoulder belt.
To make the belt shorter, pull its free end as shown until the belt is snug.
If the belt is not long enough, see Safety Belt Extender on page 3‑21.
Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if necessary.
See also:
Windshield and Wiper Blades
Clean the outside of the windshield with glass cleaner.
Clean rubber blades using a lint-free cloth or paper towel soaked with windshield washer fluid or a mild detergent. Wash the windshield thoroug ...
How to Inspect the Engine Air Cleaner/Filter
To inspect the air cleaner/filter, remove the engine air cleaner/filter from the vehicle by following Steps 1 through 6. When the engine air cleaner/filter is removed, lightly shake it to release loos ...
Trailer Sway Control (TSC)
Non-hybrid vehicles with StabiliTrak have a Trailer Sway Control (TSC) feature. If the vehicle is towing a trailer and the system detects that the trailer is swaying, the vehicle brakes are applied wi ...