Replacing the Engine Air Cleaner/ Filter

1. Locate the air cleaner/filter assembly. See Engine Compartment Overview on page 10‑6.

1. Locate the air cleaner/filter assembly. See Engine Compartment Overview on page 10‑6.

2. Loosen the four screws on the cover of the housing and lift up the cover.

3. Remove the engine air cleaner/ filter from the housing. Take care to dislodge as little dirt as possible.

3. Remove the engine air cleaner/ filter from the housing. Take care to dislodge as little dirt as possible.

4. Clean the engine air cleaner/ filter sealing surfaces and the housing.

5. Inspect or replace the engine air cleaner/filter.

6. Reinstall the cover and tighten the screws.

WARNING
Operating the engine with the air cleaner/filter off can cause you or others to be burned. The air cleaner not only cleans the air; it helps to stop flames if the engine backfires. Use caution when working on the engine and do not drive with the air cleaner/filter off.

    See also:

    TPMS Sensor Matching Process
    Each TPMS sensor has a unique identification code. The identification code needs to be matched to a new tire/wheel position after rotating the tires or replacing one or more of the TPMS sensors. T ...

    Steering Wheel Controls
    Steering Wheel Controls If available, some audio controls can be adjusted at the steering wheel. : Press to go to the next favorite radio station, track on a CD, or folder on an iPod® or USB ...

    Parade Dimming
    This feature automatically prohibits the dimming of the instrument panel displays in daylight while the headlamps are on so that the displays are still able to be seen. ...