Starter Switch Check
WARNING
When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured.
1. Before starting this check, be sure there is enough room around the vehicle.
2. Firmly apply both the parking brake and the regular brake.
See Parking Brake on page 9‑58.
Do not use the accelerator pedal, and be ready to turn off the engine immediately if it starts.
3. Try to start the engine in each gear. The vehicle should start only in P (Park) or N (Neutral).
If the vehicle starts in any other position, contact your dealer for service.
See also:
Recommended Fluids, Lubricants, and Parts
Recommended Fluids and Lubricants
Maintenance Replacement Parts
Replacement parts identified below by name, part number, or specification can
be obtained from your dealer.
...
2010 GMC Terrain Review by G. Chambers Williams III
Consumers can't seem to get enough of the all-new GMC Terrain compact
crossover and its Chevrolet sibling, the Equinox.
These fuel-efficient family vehicles are selling so well that the plant in
...
Flash-to-Pass
This feature is used to signal to the vehicle ahead that you want to pass.
If the headlamps are off or in the low-beam position, pull the turn signal lever toward you to momentarily switch to high be ...