Passenger Compartment Air Filter
The filter removes dust, pollen, and other airborne irritants from outside air that is pulled into the vehicle.
The filter should be replaced as part of routine scheduled maintenance. See Maintenance Schedule on page 11‑3 for replacement intervals. To find out what type of filter to use, see Maintenance Replacement Parts on page 11‑14.
The passenger compartment air filter can be accessed by removing the entire glove box.
1. Open the glove box completely and locate the stop tab on top of the glove box door.
2. Push the stop tab upwards until the stop tab is under the instrument panel
assembly and the glove box is released.
3. Unsnap the tabs beneath the glove box that connects it to the bottom of the instrument
panel assembly.
4. Remove the glove box.
5. Locate the service door for the passenger compartment air filter.
6. Push the two tabs upwards and release the latches holding the service door. Lift
the service door.
7. Remove the old air filter.
8. Install the new air filter.
9. Close the service door and latches.
10. Re-install the glove box.
See your dealer if additional assistance is needed.
See also:
Power Steering Fluid (3.0L V6 Engine)
The power steering fluid reservoir is located toward the rear of the engine compartment
on the passenger side of the vehicle. See Engine Compartment Overview on page 10‑6
for reservoir loc ...
Universal Remote System Programming
This system provides a way to replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices.
Do not use the Uni ...
Radio Messages
Calibration Error: The audio system has been calibrated for the vehicle from the factory.
If Calibration Error displays, it means that the radio has not been configured properly for the vehicle and i ...