Roof

Sunroof

The ignition must be in ON/RUN or ACC/ACCESSORY to operate the sunroof and power sunshade.

See Retained Accessory Power (RAP) on page 9‑20.

The vehicle may have a sunroof over the front seats and a rear sunroof over the second row seats.

The rear sunroof does not open.

The switch to operate the front sunroof is on the headliner above the rearview mirror.

The switch to operate the front sunroof is on the headliner above the rearview mirror.

Vent: From the closed position, press and hold the front of the switch to vent the sunroof. Press and hold the rear of the switch to close the sunroof.

Express-open/Express-close:

From the closed position, press and release the rear of the switch to express-open the sunroof. Press and release the front of the switch to express-close the sunroof.

Manual Sunshade

The front sunshade must be opened and closed manually. To open the sunshade, press the button on the sunshade handle to release it and guide it back. To close the sunshade, pull the sunshade forward until it latches.

Dirt and debris may collect on the sunroof seal or in the track.

Dirt and debris may collect on the sunroof seal or in the track.

This could cause an issue with sunroof operation or noise.

It could also plug the water drainage system. Periodically open the sunroof and remove any obstacles or loose debris. Wipe the sunroof seal and roof sealing area using a clean cloth, mild soap, and water.

Do not remove grease from the sunroof.

    See also:

    Remote Control
    To use the remote control, aim it at the transmitter window at either seatback console and press the button. Direct sunlight or very bright light could affect the ability of the RSE transmitter ...

    AM-FM Radio and AM-FM Radio with CD Player
    To set the clock: 1. Turn the ignition key to ACC/ ACCESSORY or ON/RUN, then press the button to turn the radio on. 2. Press the button until the hour numbers begin to flash, then turn the knob t ...

    Tow/Haul Mode
    Tow/Haul assists when pulling a heavy trailer or a large or heavy load. The purpose of the Tow/Haul mode is to: • Reduce the frequency and improve the predictability of transmission shifts. • Pr ...